old piece of reconditioned equipment, so you have to ask yourself who you are dealing with. How do they "renew" equipment? How do you know what is done to the equipment? If the equipment doesn't per-form as promised, what is the supplier going to do about it?

If possible, work with a material handling equipment supplier you know. Barring this, it is important to identify a supplier with experience in refurbishing the kinds of equipment you are consi

Material handling systems (conveyors, sorting systems, shelving, etc.) represent a major purchasing decision, no matter how you slice it. The wrong decision can be costly, and making the right decision can be difficult, largely because of the number and nature of the options available.

Of course, you could just pay top dollar for new equipment. You know exactly what you are getting, assuming the equipment performs up to specs. Your only concern is the possibility that you have paid more for it than you really had to.

You could save money (or at least spend less, which is not always the same thing) by purchasing used equipment. Now all you have to worry about is dependability-or, at worst, the cost of replacing the equipment if it doesn't do the job it was intended to do.

Finally, there is reconditioned equipment. This saves some money, but not as much as buying used. On the other hand, it should perform better than used, if not as well as new. That's the theory, but you can never really be sure what was done to the equipment other than a quick paint job. Ideally, reconditioned equipment should be the perfect compromise between the quality of new and the cost savings of used equipment. However, unless you know exactly what to look for, you will have a hard time predicting performance and measuring it against the cost of the equipment.

Fortunately, there is a fourth option which attempts to eliminate this uncertainty by specifying - and guaranteeing exactly what has been done to used equipment before it is once again offered for sale. "Renewed" equipment permits informed purchasing. You can calculate, as with new equipment, the value of the purchase based on anticipated performance versus cost.

Who Do You Trust?

Of course, anybody can slap a "renewed" label on some old piece of reconditioned equipment, so you have to ask yourself who you are dealing with. How do they "renew" equipment? How do you know what is done to the equipment? If the equipment doesn't per-form as promised, what is the supplier going to do about it?

If possible, work with a material handling equipment supplier you know. Barring this, it is important to identify a supplier with experience in refurbishing the kinds of equipment you are consid

he possibility that you have paid more for it than you really had to.

You could save money (or at least spend less, which is not always the same thing) by purchasing used equipment. Now all you have to worry about is dependability-or, at worst, the cost of replacing the equipment if it doesn't do the job it was intended to do.

Finally, there is reconditioned equipment. This saves some money, but not as much as buying used. On the other hand, it should perform better than used, if not as well as new. That's the theory, but you can never really be sure what was done to the equipment other than a quick paint job. Ideally, reconditioned equipment should be the perfect compromise between the quality of new and the cost savings of used equipment. However, unless you know exactly what to look for, you will have a hard time predicting performance and measuring it against the cost of the equipment.

Fortunately, there is a fourth option which attempts to eliminate this uncertainty by specifying - and guaranteeing exactly what has been done to used equipment before it is once again offered for sale. "Renewed" equipment permits informed purchasing. You can calculate, as with new equipment, the value of the purchase based on anticipated performance versus cost.

Who Do You Trust?

Of course, anybody can slap a "renewed" label on some old piece of reconditioned equipment, so you have to ask yourself who you are dealing with. How do they "renew" equipment? How do you know what is done to the equipment? If the equipment doesn't per-form as promised, what is the supplier going to do about it?

If possible, work with a material handling equipment supplier you know. Barring this, it is important to identify a supplier with experience in refurbishing the kinds of equipment you are consi

t should perform better than used, if not as well as new. That's the theory, but you can never really be sure what was done to the equipment other than a quick paint job. Ideally, reconditioned equipment should be the perfect compromise between the quality of new and the cost savings of used equipment. However, unless you know exactly what to look for, you will have a hard time predicting performance and measuring it against the cost of the equipment.

Fortunately, there is a fourth option which attempts to eliminate this uncertainty by specifying - and guaranteeing exactly what has been done to used equipment before it is once again offered for sale. "Renewed" equipment permits informed purchasing. You can calculate, as with new equipment, the value of the purchase based on anticipated performance versus cost.

Who Do You Trust?

Of course, anybody can slap a "renewed" label on some old piece of reconditioned equipment, so you have to ask yourself who you are dealing with. How do they "renew" equipment? How do you know what is done to the equipment? If the equipment doesn't per-form as promised, what is the supplier going to do about it?

If possible, work with a material handling equipment supplier you know. Barring this, it is important to identify a supplier with experience in refurbishing the kinds of equipment you are consi

p>Fortunately, there is a fourth option which attempts to eliminate this uncertainty by specifying - and guaranteeing exactly what has been done to used equipment before it is once again offered for sale. "Renewed" equipment permits informed purchasing. You can calculate, as with new equipment, the value of the purchase based on anticipated performance versus cost.

Who Do You Trust?

Of course, anybody can slap a "renewed" label on some old piece of reconditioned equipment, so you have to ask yourself who you are dealing with. How do they "renew" equipment? How do you know what is done to the equipment? If the equipment doesn't per-form as promised, what is the supplier going to do about it?

If possible, work with a material handling equipment supplier you know. Barring this, it is important to identify a supplier with experience in refurbishing the kinds of equipment you are consi

old piece of reconditioned equipment, so you have to ask yourself who you are dealing with. How do they "renew" equipment? How do you know what is done to the equipment? If the equipment doesn't per-form as promised, what is the supplier going to do about it?

If possible, work with a material handling equipment supplier you know. Barring this, it is important to identify a supplier with experience in refurbishing the kinds of equipment you are considering, and who has an established reputation in the industry for standing behind the products they sell. Talk to other customers. To be on the safe side, try to talk to customers that aren't on a list given you by the supplier.

Visit the supplier's facility, if at all possible. Do they have the engineers and qualified shop personnel to inspect, test, rebuild and retrofit the equipment? Do they make the product cosmetically attractive, but neglect the additional work needed to revitalize the equipment's performance. Do they have a process that includes extensive inspection and testing? Do they offer a guarantee that the equipment will perform as advertised?

The Renewal Process

A true equipment renewal program adds value to the equipment at every stage, from disassembly at its previous location until it is installed and functioning in your facility.

Disassembly. Material handling equipment undergoes wear and tear throughout its working life. Regular maintenance and intelligent operation of the equipment can keep this to a minimum, but all this good work can be wasted by careless disassembly. Before accepting the equipment as potentially renewable, the supplier must examine the equipment on site, along with any maintenance records. Even more critically, an experienced, reliable crew must be employed to tear the system down, categorize, palletize and transport it to the renewal facility.

Evaluation. As mentioned earlier, a certain amount of wear and tear is inevitable. Some is acceptable, and is one reason that renewed equipment costs less than new. Excessive wear, however, is not acceptable. Some elements of a system may be rejected, or sold as used at a lower price. Frequently, the wear and tear is concentrated in easily replaced parts such as seals, rollers