Tags |
|
|
Links |
|
|
Item Upon - Cisco CCNA Exam Tutorial: Route Summarization
Not only during the disturbing periods of change, but in day-to-day management situation too: action is always essential. A dynamic company could be characterized by the way action and analysis is combined in an efficient way. Too much action maybe counter-effective. This could be the case for instance if these actions contributed from the various parts of the organization do not add-up.We all know that in most cases strategic planning’s will be prepared by staff departments. These are dedicated to t
R1(config-if)#ip summary-address rip 100.16.0.0 255.252.0.0
R1(config-if)#ip summary-address eigrp 100 100.16.0.0 255.252.0.0
The main difference between the two is that the EIGRP command must specify the AS number - that's what the "100" is in the middle of the EIGRP command. Since RIPv2 does not use AS numbers, there's no additional value needed in the configuration.
For OSPF, the commands differ. If you're configuring inter-area route summarization, use the "area range" command; if you are summarizing routes that are being redistributed into OSPF, use the summary-address command under the OSPF routi
Burbank, California, is located in Los Angeles County, and is nine miles north of Los Angeles, California. Burbank has a population of 100,316. Among its residents are those who work in the media and entertainment field. NBC, Warner Studios, and Disney Entertainment call Burbank their home. The city is served by Burbank International Airport.Burbank’s homes consist of luxury homes in the hills, and single and multi-family homes throughout the city. Its sunny weather, prosperous economy, relative saf
Route summarization isn't just important for the CCNA exam. It's a valuable skill to have in the real world as well. Correctly summarizing routes can lead to smaller routing tables that are still able to route packets accurately - what I like to call "concise and complete" routing tables.
The first skill you've got to have in order to work with route summarization is binary math; more specifically, you must be able to take multiple routes and come up with both a summary route and mask to advertise to downstream routers. Given the networks 100.16.0.0 /16, 100.17.0.0 /16, 100.18.0.0 /16, and 100.19.0.0 /16, could you quickly come up with both the summary address and mask? All you need to do is break the four network numbers down into binary strings. We know the last two octets will all convert to the binary string 00000000, so in this article we'll only illustrate how to convert the first and second octet from decimal to binary.
100 16 = 01100100 00010000
100 17 = 01100100 00010001
100 18 = 01100100 00010010
100 19 = 01100100 00010011
To come up with the summary route, just work from left to right and draw a line where the four networks no longer have a bit in common. For these four networks, that point comes between the 14th and 15th bits. This leaves us with this string: 01100100 000100xx. All you need to do is convert that string back to decimal, which gives us 100 for the first octet and 16 for the second. (The two x values are bits on the right side of the line, which aren't used in calculating the summary route.) Since we know that zero is the value for the last two octets, the resulting summary network number is 100.16.0.0.
But we're not done! We now have to come up with the summary mask to advertise along with the summary route. To arrive at the summary route, write out a mask in binary with a "1" for every bit to the left of the line we drew previously, and a "0" for every bit to the right. That gives us the following string:
11111111 11111100 00000000 00000000
Converting that to dotted decimal, we arrive at the summary mask 255.252.0.0. The correct summary network and mask to advertise are 100.16.0.0 252.0.0.0.
For the CCNA exam, emphasis is put on knowing how to advertise these summary routes in RIPv2 and EIGRP. For both of these protocols, route summarization happens at the interface level - it's not configured under the protocol. On the interface that should advertise the summary route, use the command "ip summary-address". Here are examples of how the above summary route would be configured on ethernet0 in both RIPv2 and EIGRP.
R1(config-if)#ip summary-address rip 100.16.0.0 255.252.0.0
R1(config-if)#ip summary-address eigrp 100 100.16.0.0 255.252.0.0
The main difference between the two is that the EIGRP command must specify the AS number - that's what the "100" is in the middle of the EIGRP command. Since RIPv2 does not use AS numbers, there's no additional value needed in the configuration.
For OSPF, the commands differ. If you're configuring inter-area route summarization, use the "area range" command; if you are summarizing routes that are being redistributed into OSPF, use the summary-address command under the OSPF routin
The more things change, the more it seems they don't change.Most salespeople just don't get it. Too many salespeople just talk to much.One of the fatal flaws of professional selling is too little listening and too much talking.According to John Asher, another sales trainer, 95% of all salespeople talk too much and I think he's right.Salespeople just love to talk. And why not - that's why you're hired.The best salespeople listen more than they talk and the simple truth is
100 16 = 01100100 00010000
100 17 = 01100100 00010001
100 18 = 01100100 00010010
100 19 = 01100100 00010011
To come up with the summary route, just work from left to right and draw a line where the four networks no longer have a bit in common. For these four networks, that point comes between the 14th and 15th bits. This leaves us with this string: 01100100 000100xx. All you need to do is convert that string back to decimal, which gives us 100 for the first octet and 16 for the second. (The two x values are bits on the right side of the line, which aren't used in calculating the summary route.) Since we know that zero is the value for the last two octets, the resulting summary network number is 100.16.0.0.
But we're not done! We now have to come up with the summary mask to advertise along with the summary route. To arrive at the summary route, write out a mask in binary with a "1" for every bit to the left of the line we drew previously, and a "0" for every bit to the right. That gives us the following string:
11111111 11111100 00000000 00000000
Converting that to dotted decimal, we arrive at the summary mask 255.252.0.0. The correct summary network and mask to advertise are 100.16.0.0 252.0.0.0.
For the CCNA exam, emphasis is put on knowing how to advertise these summary routes in RIPv2 and EIGRP. For both of these protocols, route summarization happens at the interface level - it's not configured under the protocol. On the interface that should advertise the summary route, use the command "ip summary-address". Here are examples of how the above summary route would be configured on ethernet0 in both RIPv2 and EIGRP.
R1(config-if)#ip summary-address rip 100.16.0.0 255.252.0.0
R1(config-if)#ip summary-address eigrp 100 100.16.0.0 255.252.0.0
The main difference between the two is that the EIGRP command must specify the AS number - that's what the "100" is in the middle of the EIGRP command. Since RIPv2 does not use AS numbers, there's no additional value needed in the configuration.
For OSPF, the commands differ. If you're configuring inter-area route summarization, use the "area range" command; if you are summarizing routes that are being redistributed into OSPF, use the summary-address command under the OSPF routi
Pay per click advertising is a powerful method of getting directly in front of people who are looking to buy right now precisely what you are selling. This article will discuss more about pay per click advertising and how to get started.With pay per click advertising you have the ability to get right in front of your target market and audience in just a matter of a few minutes.It takes on average just 10 minutes or so to create an Adwords campaign. That means in just 10 minutes you could be ha
But we're not done! We now have to come up with the summary mask to advertise along with the summary route. To arrive at the summary route, write out a mask in binary with a "1" for every bit to the left of the line we drew previously, and a "0" for every bit to the right. That gives us the following string:
11111111 11111100 00000000 00000000
Converting that to dotted decimal, we arrive at the summary mask 255.252.0.0. The correct summary network and mask to advertise are 100.16.0.0 252.0.0.0.
For the CCNA exam, emphasis is put on knowing how to advertise these summary routes in RIPv2 and EIGRP. For both of these protocols, route summarization happens at the interface level - it's not configured under the protocol. On the interface that should advertise the summary route, use the command "ip summary-address". Here are examples of how the above summary route would be configured on ethernet0 in both RIPv2 and EIGRP.
R1(config-if)#ip summary-address rip 100.16.0.0 255.252.0.0
R1(config-if)#ip summary-address eigrp 100 100.16.0.0 255.252.0.0
The main difference between the two is that the EIGRP command must specify the AS number - that's what the "100" is in the middle of the EIGRP command. Since RIPv2 does not use AS numbers, there's no additional value needed in the configuration.
For OSPF, the commands differ. If you're configuring inter-area route summarization, use the "area range" command; if you are summarizing routes that are being redistributed into OSPF, use the summary-address command under the OSPF routi
Anybody looking at equity loans as a means of borrowing would be wise to compare the rates for equity loans, refinancing as well as credit lines. This is because loans more often than not come with either a prime rate, fixed or variable rate. Refinancing is usually a better option than home equity loans or credit lines when your equity has dropped below its market value.Refinancing extends some extra cash to the homeowner to spend on his most pressing needs. It also offers a vehicle to help r
11111111 11111100 00000000 00000000
Converting that to dotted decimal, we arrive at the summary mask 255.252.0.0. The correct summary network and mask to advertise are 100.16.0.0 252.0.0.0.
For the CCNA exam, emphasis is put on knowing how to advertise these summary routes in RIPv2 and EIGRP. For both of these protocols, route summarization happens at the interface level - it's not configured under the protocol. On the interface that should advertise the summary route, use the command "ip summary-address". Here are examples of how the above summary route would be configured on ethernet0 in both RIPv2 and EIGRP.
R1(config-if)#ip summary-address rip 100.16.0.0 255.252.0.0
R1(config-if)#ip summary-address eigrp 100 100.16.0.0 255.252.0.0
The main difference between the two is that the EIGRP command must specify the AS number - that's what the "100" is in the middle of the EIGRP command. Since RIPv2 does not use AS numbers, there's no additional value needed in the configuration.
For OSPF, the commands differ. If you're configuring inter-area route summarization, use the "area range" command; if you are summarizing routes that are being redistributed into OSPF, use the summary-address command under the OSPF routi
Hate opening the post? Dread receiving the bill and Bank Statements? Sounds like your finances are becoming a problem.The ostrich solution never works when it comes to debts – they just don't go away that easily. Take a tip - there's never a better time like the present to tackle a debt problem – as soon as piling bills give you a knotted feeling in your stomach, face up to the problem.Here's some practical advice.Make savings on your credit card bills.Savings should be easy to c
R1(config-if)#ip summary-address rip 100.16.0.0 255.252.0.0
R1(config-if)#ip summary-address eigrp 100 100.16.0.0 255.252.0.0
The main difference between the two is that the EIGRP command must specify the AS number - that's what the "100" is in the middle of the EIGRP command. Since RIPv2 does not use AS numbers, there's no additional value needed in the configuration.
For OSPF, the commands differ. If you're configuring inter-area route summarization, use the "area range" command; if you are summarizing routes that are being redistributed into OSPF, use the summary-address command under the OSPF routing process on the ASBR. Neither of these are interface-level commands.
I speak from experience when I tell you that practice makes perfect on the CCNA exam, especially with binary and summarization questions. The great thing about these questions is that there are no grey areas with these questions - you either know how to do it or you don't. And with practice and an eye for detail, you can master these skills, pass the exam, and become a CCNA. Here's to your success!
HTTP = HTML link (for blogs, profiles,phorums):
<a href="http://www.itemupon.com/article/171207/itemupon-Cisco-CCNA-Exam-Tutorial--Route-Summarization.html">Cisco CCNA Exam Tutorial: Route Summarization</a>
BB link (for phorums):
[url=http://www.itemupon.com/article/171207/itemupon-Cisco-CCNA-Exam-Tutorial--Route-Summarization.html]Cisco CCNA Exam Tutorial: Route Summarization[/url]
Related Articles:
Why Employers and Freelancers Resort to Mystery Shopping More and More Often
Are Student Loans Dischargeable When You Fill for Bankruptcy?
Microsoft's Vista: What You Must Know Before You Buy
Bookmark it:
|